Support NP3 – Beam perpendicular to the foundation

139.95 $ +tx

Professional quality patio bracket able to sustain a 3000 lb load. It is secured directly to the foundation, and the beam is placed perpendicular to it (see illustration). The part is hot-dip galvanized to withstand northern conditions.

- +
Category:

Description

Limit the impact to your home. The NP3 model allows the terrace to be installed close to the ground with its anchors on either side of the beams’ base. Also it limits damage to the cladding or to the isolation of ICF homes (Insulated Concrete Forms). It is therefore no longer necessary to cut along the whole length of the patio. The NP18 model limits the risk of breakage and water ingress by inserting only the end of the beam through the cladding. Very cost-effective due to it’s simple design and fast installation. Screw anchors to secure the bracket included!

Hardware: 2 X Hilti 1/2″ x 4 1/2″ HUS Screw anchors included. The bracket’s 3000lb certification is dependent on the use of these anchors.
For the hole, use a 1/2″ x 6″ drill bit.

Additional information

Weight 3.9 kg
Dimensions 19 × 27 × 12.8 cm

Reviews

There are no reviews yet.

Be the first to review “Support NP3 – Beam perpendicular to the foundation”

You may also like…