Vous construisez ou rénovez un patio ou une terrasse, exigez les « Supports Nami Fix » de qualité professionnelle. La solution recommandée pour éviter les infiltrations d’eau.
Support NP4 – Beam perpendicular to the foundation
149.95 $ +tx
Professional quality patio bracket able to sustain a 4000lb load. It is secured directly to the foundation, and the beam is placed perpendicular to it (see illustration). The part is hot-dip galvanized to withstand northern conditions.
Gives 3″ of clearance space from the foundation
Description
Keep your exterior cladding intact and avoid water ingress by using our Professional quality patio bracket able to sustain a 4000 lb load. This bracket facilitates the installation of a patio while also limiting the impact on the building. Very cost-effective due to it’s simple design and fast installation. It is secured directly to the foundation, and the beam is placed parallel to it (see illustration). The part is hot-dip galvanized to withstand northern conditions. Screw anchors to secure the bracket included!
Hardware: 2 X Hilti 5/8″ x 5 1/2″ HUS Screw anchors included. The bracket’s 4000lb certification is dependent on the use of these anchors.
For the hole, use a 5/8″ x 8″ drill bit.
Additional information
| Weight | 6.8 kg |
|---|---|
| Dimensions | 21 × 50.8 × 11.8 cm |
Be the first to review “Support NP4 – Beam perpendicular to the foundation”
You must be <a href="https://www.namifix.com/en/my-account/">logged in</a> to post a review.
You may also like…
Support NP3 – Beam perpendicular to the foundation
139.95 $ +tx
Professional quality patio bracket able to sustain a 3000 lb load. It is secured directly to the foundation, and the beam is placed perpendicular to it (see illustration). The part is hot-dip galvanized to withstand northern conditions.
Bolt kit for NP3
8.99 $ +tx
Associated with the NP3
Set of 2 bolts (3/8 X 4 in) + 2 nuts + 4 stainless steel washers to secure the beam in the NP3 brackets
Reviews
There are no reviews yet.