SUPPORT NP5 – Beam perpendicular to the foundation

229.95 $ +tx

Professional grade patio support that can support a 5,000 lb load. It is attached directly to the foundation and the beam is installed in a perpendicular position (see illustration). The part is galvanized to withstand northern climatic conditions. Gives 3 ″ clearance from the foundation. Has a 4 ½ ”seat for the beam.

- +
Category:

Description

Keep your exterior siding intact using our support and prevent water infiltration. Professional grade patio support that can support a 5,000 lb load. This support facilitates the installation of a terrace-type structure while limiting the impact on the building. Becomes very economical due to its simplicity and speed of installation. It is attached directly to the foundation and the beam is installed in a perpendicular position (see illustration). The part is galvanized to withstand northern climatic conditions. Anchors to fix the support are included!

Hardware: 2 x Hilti 3/4 ″ x 5 1/2 ″ HUS anchor screws supplied with the bracket. Only the use of these anchors allows to have the 5000 lb certification of the support. For drilling, use a 3/4 ″ x 8 ″ drill bit.

Reviews

There are no reviews yet.

Be the first to review “SUPPORT NP5 – Beam perpendicular to the foundation”